CARTRIDGE LOCK 12A ( PACK OF 5)
In stock
₹29.00The term “CARTRIDGE LOCK 12A” typically refers to a specific type of toner cartridge used in laser printers, specifically in the HP LaserJet 12A toner cartridges. The “12A” is a model number for a toner cartridge designed for use with various HP printers.
CCD Scanner Cable For HP LJ M126 | M127 | M128
In stock
₹56.00The CCD Scanner Cable for HP LaserJet Pro M126, M127, and M128 printers is a specialized Flexible Flat Cable (FFC) that serves as the high-speed data highway between the printer’s main formatter logic board and the scanner head.
CCD Scanner Motor FOR HP LJ 1136 (REFURBISHED)
In stock
₹280.00The Refurbished CCD Scanner Motor (also referred to as the CIS head motor or upper scanner motor) for the HP LaserJet Pro M1136 is the dedicated electronic motor responsible for driving the optical scanner head carriage smoothly across the flatbed glass panel. Refurbished or “pulled original” motors are widely used by service technicians to restore flatbed scanner assemblies without needing to purchase the entire expensive scanning glass deck housing.
Engine Control Unit For Canon LBP 2900B (REFURBISHED)
In stock
₹700.00The Refurbished Engine Control Unit (ECU Card) (also known as the Engine Controller Board or DC Control Card) for the Canon Laser Shot LBP 2900B is the primary hardware controller board responsible for dictating real-time electro-mechanical printer behaviors. While the separate formatter board acts as the digital computer handling USB signals, the ECU serves as the physical coordinator—managing paper feed timings, driving system motors, pulsing high-voltage to the laser scanner unit (LSU), and monitoring internal sensors
Engine Control Unit For HP LJ 1136 | P1108 (REFURBISHED)
In stock
₹385.00
Fuser Drive Gear For HP LJ P1006 | P1007 | P1008
In stock
₹33.00The Printstar Fuser Drive Gear for HP LaserJet P1006, P1007, and P1008 is a critical, low-cost mechanical replacement gear located inside the printer’s main side-drive train assembly. It meshes directly with the internal motor transmission to turn the fuser’s hot rollers, pulling paper smoothly through the final heating stage where toner is permanently melted into the page fibers
Fuser Handle For HP LJ 1010 | 1020 |1005
In stock
₹54.00
HDMI CABLE 2K 1.5M
In stock
₹70.00* HDMI A Male to A Male Cable: Supports Ethernet, 3D, 4K video and Audio Return Channel (ARC).
* Connects Blu-ray players, Fire TV, Apple TV, PS4, PS3, XBox one, Xbox 360, computers and other HDMI-enabled devices to TVs, displays, A/V receivers and more
HDMI CABLE 4K 10M
In stock
₹450.00- UGREEN HDMI Cable 10m 4K@60Hz High-Speed Connectivity — Reliable for TVs, monitors, and projectors.
- Honeywell HDMI 2.0 Cable with Ethernet 10M — Good build quality and stable 4K output.
- MICROWARE 10M Ultra HD HDMI 2.1 Cable — Better if you want HDMI 2.1 features like 4K@120Hz (device support required).
HDMI CABLE 4K 20M
In stock
₹650.00Best choice for long-distance runs (20m) because fiber-optic HDMI cables are designed to reduce signal loss and support high bandwidth over longer distances.
HDMI CABLE 4K 3M
In stock
₹150.00* 18GBPS SPEED BANDWIDTH – High speed HDMI 2.0 cable support bandwidth speed up to 18Gbps. It can provide you high speed data transmission, you can enjoy games /movies without delay or black screen.
HDMI CABLE 4K 5M
In stock
₹250.00For a 5 Meter 4K HDMI Cable, the most important factors are HDMI version, 4K refresh rate support, and build quality. HDMI 2.0 is sufficient for 4K@60Hz, while HDMI 2.1 is better if you need 4K@120Hz for gaming
Laser Scanner For HP LJ P1007 | Canon LBP3108 (REFURBISHED)
In stock
₹504.00The Refurbished Laser Scanner Unit (LSU) (also known as the lower scanner or imaging unit) for the HP LaserJet P1007 and Canon Laser Shot LBP3108 is the internal electro-optical module responsible for drafting text and graphics before printing. It receives digital files from the motherboard and fires a precision laser beam onto a fast-spinning polygon mirror, reflecting the light down to draw an invisible static electrostatic blueprint across the OPC drum cartridge to attract toner powder.
Logic Card For HP LJ M1005 Original Type (REFURBISHED)
In stock
₹2,415.00The Refurbished Original Logic Card (also universally referred to as the Formatter Board, Main PCB, or Motherboard) for the HP LaserJet M1005 MFP is the central data-processing computer of the printer. While secondary cards control raw motor voltages, the Logic Card manages the complex software operations—including processing print streams from computers, digitizing optical scans, handling the USB interface connection, and maintaining the device’s firmware system.
lower Roller Bushing For HP LJ P1006 | P1007 | P1008
In stock
₹31.00The Lower Roller Bushing (also known as the Pressure Roller Bush or Fuser Bushing) is a small, heat-resistant mechanical component that anchors the fuser assembly’s lower pressure roller
Lower Roller Gear HP LJ 1007 | 1008 | P1102
In stock
₹36.00
Lower Roller Gear HP LJ 1010 | M1005 |1020 | LBP2900B
In stock
₹28.00
Maintenance Box For Epson T6193 | SC1MB
In stock
₹661.00The Epson T6193 (also known as SC1MB or C13T619300) Maintenance Box is a user-replaceable consumable cartridge designed for Epson’s high-performance, large-format inkjet plotters and dye-sublimation printers.
Maintenance Box For Epson T6997 | SC9MB
In stock
₹595.00The Epson T6997 (also referenced as SC9MB, S29MB, or C13T699700) Maintenance Box is an essential consumable module designed for Epson’s industrial wide-format technical plotters and professional photographic printers.
MSI Motherboard H81M-P33 DDR3 For Intel 4th Gen (Import)
In stock
₹2,987.00The MSI H81M-P33 is a highly popular, budget-friendly Micro-ATX (m-ATX) motherboard explicitly built around the Intel H81 Express chipset. It features the LGA 1150 CPU socket, meaning it directly supports Intel 4th Generation Core i3, i5, i7, Pentium, and Celeron processors
Online store of household appliances and electronics
Then the question arises: where’s the content? Not there yet? That’s not so bad, there’s dummy copy to the rescue. But worse, what if the fish doesn’t fit in the can, the foot’s to big for the boot? Or to small? To short sentences, to many headings, images too large for the proposed design, or too small, or they fit in but it looks iffy for reasons.
A client that’s unhappy for a reason is a problem, a client that’s unhappy though he or her can’t quite put a finger on it is worse. Chances are there wasn’t collaboration, communication, and checkpoints, there wasn’t a process agreed upon or specified with the granularity required. It’s content strategy gone awry right from the start. If that’s what you think how bout the other way around? How can you evaluate content without design? No typography, no colors, no layout, no styles, all those things that convey the important signals that go beyond the mere textual, hierarchies of information, weight, emphasis, oblique stresses, priorities, all those subtle cues that also have visual and emotional appeal to the reader.
